مقاله در مجلات

Journal title, volume, issue, pages.
2022 اكبر اميني، مرجان رجبي، سيد محمد زهرايي، فاطمه نوروزيان ZBS اثر ترکیب بر پارامترهای فلش زینتر سرامیک وریستور بر پایه فصلنامه سراميك ايران 17 (4) (1400) 53-45
2022 N. S. Faal Nazari, M. Rajabi, and A. Z. Moshfegh The UV photodetection enhancement of tailored ZnO nanorods by controlling the aspect ratio Surfaces and Interfaces 2 (2022) 101682
2022 A. Amini, M. Rajabi, S. M. Zahraee Microstructure and electrical properties of flash sintered ZnO-Bi2O3-Sb2O3 varistors: Effect of current density with a controlled current ramp Materials Chemistry and Physics 295 (2023) 127094
2022 S. Sohrabi , B.Y. Sun, M. Mahmoodan , Y.H. Sun, R. Gholamipour , W.H. Wang Rejuvenation by compressive elasto-static loading: The role of static stress on a Zr-based metallic glass Journal of Alloys and Compounds Volume 933, 5 February 2023, 167715
2022 Hamed Kaypour, Said Nategh, Reza Gholamipour, Alireza Khodabandeh Efect of Aluminum Addition on Microstructure, Recrystallization and Work Hardening of MnCrCoFeNi High‑Entropy Alloy Transactions of the Indian Institute of Metals https://doi.org/10.1007/s12666-022-02718-y
2022 D Kokabi, A Kaflou, R Gholamipour, M Pouranvari Factors affecting strength of dissimilar TiAl/Ni–Si–B/Ni-based superalloy brazed joint Journal of Materials Science
2022 Majid Samavatian, Reza Gholamipour, Dmitry Olegovich Bokov, Wanich Suksatan, Vahid Samavatian, Morteza Mahmoodan Characterization of nanoscale structural heterogeneity in metallic glasses: A machine learning study Journal of Non-Crystalline Solids
2022 S Sohrabi, R Gholamipour Glass transition kinetics and fragility of ZrCuAlNi (Nb) metallic glasses Intermetallics
2022 A.A. Shehab, S.K. Sadrnezhaad, M. Alali, M. Fakouri Hasanabadi, M.J. Torkamany, M.H. Abass, A.K. Mahmoud, A.H. Kokabi Laser Welding of Titanium Grade 2 and Aluminium AA 3105-O Using a New AlScZr Filler Metal Lasers in Manufacturing and Materials Processing
2021 رضا غلامی پور بهبود اندیس تیزی تیغه جراحی با استفاده از آلیاژ آمورف حجمی پایه زیرکونیوم مهندسی متالورژی بهار 1400 10.22076/ME.2022.123442.1306
2021 S.M. Fathabad, F. Shahri BH hysteresis measurement system for thin soft magnetic materials Measurement, 172, 108896.
2021 F. Shahri, S.M. Fathabad Evaluation of magnetic and giant magnetoimpedance properties in amorphous Co-based magnetic biosensor Metallurgical Engineering, 1399, 78, 163-175
2021 M. Fakouri Hasanabadi, A. H. Kokabi, M. A. Faghihi‐Sani, H. Abdoli, J. Malzbender, and S. Gross‐Barsnick Advanced analysis of flexural test results of sealant for solid oxide cells International Journal of Applied Ceramic Technology, p. ijac.13842
2021 A. A. Shaik, M. Fakouri Hasanabadi, and V. K. Arulvizhi Joining of ceramic to metal by friction welding process: a review Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications
2021 M. Fakouri Hasanabadi, J. Malzbender, S. M. Groß-Barsnick, H. Abdoli, A. H. Kokabi, and M. A. Faghihi-Sani Micro-scale evolution of mechanical properties of glass-ceramic sealant for solid oxide fuel/electrolysis cells Ceramics International, vol. 47, no. 3, pp. 3884–3891
2021 Elham Mohagheghpour, Marjan Rajabi, Reza Gholamipour, Sakineh Hosseinabadi Optical properties and surface growth mechanism of amorphous Carbon nanolayers Int. J. Nano Dimens., 12 (4): 402-410, Autumn 2021
2021 Hamed kaypour, Said Nategh, Reza Gholamipour and Ali Reza Khodabandeh High-temperature compressive behavior and kinetic analysis of Al0. 4MnCrCoFeNi high entropy alloy Materials Research Express
2021 Dariush Kokabi, ALI KAFLOU, MAJID POURANVARI, Reza Gholamipour Phase transformations during high temperature brazing of dissimilar bonding of IN738 to TiAl intermetallic compound using Ni-Si-B ternary filler alloy ADVANCED PROCESSES IN MATERIALS, 2021/1/1
2021 Sajad Sohrabi, Reza Gholamipour Effect of Nb minor addition on the crystallization kinetics of Zr-Cu-Al-Ni metallic glass Journal of Non-Crystalline Solids
2021 Morteza Mahmoodan, Reza Gholamipour, Sajad Sohrabi Tuning Glass Formation and Mechanical Properties of ZrCoAl (Nb) Bulk Metallic Glass with Nb Microalloying Process Transactions of the Indian Institute of Metals
2021 E Mohagheghpour, M Larijani, M Rajabi, R Gholamipour Effect of Silver Clusters Deposition on Wettability and Optical Properties of Diamond-like Carbon Films International Journal of Engineering
2021 Majid Samavatian, Reza Gholamipour, Vahid Samavatian Discovery of novel quaternary bulk metallic glasses using a developed correlation-based neural network approach Computational Materials Science
2020 S.M. Fathabad, F. Shahri, R. Gholamipour The microstructural characterization, physical and dynamic magnetic properties of (Ni49Fe51)100-xCrx (x=0,3,7) thin sheets Metallurgical & Materials Transaction A, 2020, Issue 1, A 51, 323-330
2020 A. A. Shehab, S. K. Sadrnezhaad, A. K. Mahmoud, M. J. Torkamany, A. H. Kokabi, and M. Fakouri Hasanabadi Pulsed Nd: YAG laser dissimilar welding of Ti/Al3105 alloys Scientia Iranica B, vol. 27, no. 4, pp. 1982–1994
2020 H. Mousa Mirabad, A. Nemati, M.A. Faghihi-Sani, M. Fakouri Hasanabadi, and H. Abdoli Effect of YSZ sol-gel coating on interaction of Crofer22 APU with sealing glass for solid oxide fuel/electrolysis cell Journal of Alloys and Compounds, vol. 847, p. 156496
2020 M. Fakouri Hasanabadi, J. Malzbender, S.M. Groß-Barsnick, H. Abdoli, A.H. Kokabi, and M.A. Faghihi-Sani Finite element optimization of sample geometry for measuring the torsional shear strength of glass-metal joint Ceramics International, vol. 46, no. 4, pp. 4857–4863
2020 Abeer A. Shehab, S.K. Sadrnezhaad, M.J. Torkamany, M. Fakouri Hasanabadi, Muhaed Alali, A.K. Mahmoud, Mohammed H. Abass, and A.H. Kokabi Ring-like laser spot welding of Ti grade2 to AAl3105-O using AlSiMg filler metal Optik (Stuttg)., vol. 206, p. 163630
2020 Elham Mohagheghpour, SHAHAB SHEIBANI, LARIJANI MAJID MOJTAHEDZADEH, MARJAN RAJABI, Reza Gholamipour Evaluation of Optical and Structural Properties of Graphitic Amorphous Carbon Thin Film Deposited by Ion Beam Sputtering Deposition Technique at Different Ion Beam Energy IRANIAN JOURNAL OF SURFACE SCIENCE AND ENGINEERING
2020 Maryam Kazemi, Shahrokh Ahangarani, Mohammad Esmailian, Ali Shanaghi Investigation on the corrosion behavior and biocompatibility of Ti-6Al4V implant coated with HA/TiN dual layer for medical applications Surface and Coatings Technology, V397
2020 - D. Kokabi, A. Kaflou, M. Pouranvari, R. Gholamipour Microstructural evaluation of dissimilar Inconel 718 to TiAl Intermetallic compound joint by Transient Liquid Phase bonding Journal of Alloys and Compounds, 2020
2020 M. Amiri, R.Gholamipour Silica-free Zirconia-Based Primary Slurry for titanium investment casting Silica-free Zirconia-Based Primary Slurry for titanium investment casting, International Journal of Metalcasting/Volume 14, Issue 1, pp 92-97, 2020
2020 D. Kokabi, A. Kaflou, R. Gholamipour, M. Pouranvari Microstructural Evaluation during dissimilar transient liquid phase bonding of TiAl/Ni-based superalloy Microstructural Evaluation during dissimilar transient liquid phase bonding of TiAl/Ni-based superalloy, Journal of Alloys and Compounds, Accepted
2020 S. RamezaniSani, M. Rajabi, and F. Mohseni Influence of nitrogen doping on visible light photocatalytic activity of TiO2 nanowires with anatase-rutile junction Chemical Physics Letters, 744 (2020) 137217
2019 E. Maleki, F. Shahri, M. Emamy The Effect of Ca Addition on Microstructure and Mechanical Properties of Mg-5Zn Alloy Metals & Materials International, 2019, 1436-1447, https://doi.org/10.1007/s12540-019-00530-w
2019 M. Mohammadaliha, F. Shahri, S.M. Boutorabi The role of ferrotitanium as an inoculant on the microstructure and mechanical properties of low alloy steel Journal of Testing & Evaluation, , 2019, DOI:10.1520/JTE20180838
2019 H.R. Asgari Bidhendi, R. Gholamipour, F. Shahri, Effect of misch-metal addition on physical and mechanical properties of Al-Ni-Zr melt spun ribbons
2019 M. Fakouri Hasanabadi, A. H. Kokabi, M. A. Faghihi-Sani, S. M. Groß-Barsnick, and J. Malzbender Room- and high-temperature torsional shear strength of solid oxide fuel/electrolysis cell sealing material Ceramics International, vol. 45, no. 2, pp. 2219–2225
2019 M. Fakouri Hasanabadi, M. A. Faghihi-Sani, A. H. Kokabi, S. M. Groß-Barsnick, and J. Malzbender Room- and high-temperature flexural strength of a stable solid oxide fuel/electrolysis cell sealing material Ceramics International, vol. 45, no. 1, pp. 733–739
2019 Shanaghi, Ali, Chu, Paul K, Ghasemi, Sajjad, Ahangarani, Shahrokh, Zhao, Ying Effect of Ti interlayer on corrosion behavior of nanostructured Ti /TiN multilayer coating deposited Materials and Corrosion
2019 Peyqambarian, Mina, Azadi, Mahboobeh, Ahangarani Shahrokh An evaluation of the effects of the N2 /Ar gas flux ratio on various characteristics of TiC 0.3 N 0.7 nano-structure coatings on the cold work tool steel by pulsed DCPACVD Surface and Coatings Technology, V366, P366-374
2019 رضا غلامي پور - مرتضي محمودان - شمس الدين ميردامادي - سعيد ناطق بررسي رفتار شكست نمونه هاي كامپوزيتي زمينه آمورف حجمي بررسي رفتار شكست نمونه هاي كامپوزيتي زمينه آمورف حجمي, مهندسي متالورژي و مواد - پاییز و زمستان 97 - ص 131 الی 140
2019 S. Mohammadi, F Shahri, R Gholamipour The microstructural characterization, physical and dynamic magnetic properties of (Ni49Fe51)100-x Crx (x=0,3,7) thin sheets The microstructural characterization, physical and dynamic magnetic properties of (Ni49Fe51)100-x Crx (x=0,3,7) thin sheets, Metallurgical and Materials Transactions A
2019 M, samavatian, R. Gholamipour, A. Amadeh Role of Tensile Elastostatic Loading on atomic structure and Mechanical Properties of Zr55Cu30Ni5Al10 bulk metallic glass Role of Tensile Elastostatic Loading on atomic structure and Mechanical Properties of Zr55Cu30Ni5Al10 bulk metallic glass, Materials Science and Engineering A, 10 April 2019
2019 M. Samvatian, R. Gholamipour, A. Amadeh, Sh. Mirdamadi Extra rejuvenation of Zr55Cu30Al10Ni5 bulk metallic glass using elastostatic loading and cryothermal treatment interaction Extra rejuvenation of Zr55Cu30Al10Ni5 bulk metallic glass using elastostatic loading and cryothermal treatment interaction, Journal of Non-Crystalline Solids, 2019
2019 Majid Samavatian, Reza Gholamipour, Vahid Samavatian, Fahimeh Farahani Effects of Nb minor addition on atomic structure and glass forming ability of Zr55Cu30Ni5Al10 bulk metallic glass Effects of Nb minor addition on atomic structure and glass forming ability of Zr55Cu30Ni5Al10 bulk metallic glass, Materials Research Express, June 2019
2019 H.R. Asgari, R. Gholamipour, F. Shahri Effect of misch-metal addition on physical and mechanical properties of Al-Ni-Zr melt-spun ribbons Effect of misch-metal addition on physical and mechanical properties of Al-Ni-Zr melt-spun ribbons, Transactions of the Indian Institute of Metals, April 2019
2019 Majid Samavatian, Reza Gholamipour , Ahmad Ali Amadeh , Shamseddin Mirdamadi Correlation between Plasticity and Atomic Structure Evolution of a Rejuvenated Bulk Metallic Glass Correlation between Plasticity and Atomic Structure Evolution of a Rejuvenated Bulk Metallic Glass, Metallurgical and Materials Transaction A, 50 (10), 4743-4749
2019 ساينا سيمرغ و مرجان رجبي تعيين گاف انرژي اپتيكي نانوميله‌هاي دي‌اكسيد تيتانيوم به روش كوبلكا- مونك و ارزیابي آشكارسازي نوري فرابنفش ساختار طلا/ دي اكسيد تيتانيوم/ طلا پژوهش فيزيك ايران 19 (3) (1398) 654-645.
2019 Mohammad Daryani, Mahmood Kazemzad, Touradj Ebadzadeh & Ali Kaflou Study of the effect of praseodymium substitution on hydrogen storage and electrochemical properties of cerium-rich AB5 alloys Journal of the Iranian Chemical Society
2019 A.Tolouei, A. Kaflou and S.K. Sadrnezaad Effects of lithium excess and Ni content on the electrochemical performance of Li1+x (Ni0.45−xMn0.4Co0.15) O2 lithium-ion cathode materials in stoichiometric state Mater.Res.Express6(2019)085522
2019 علي كفلو و سيد محمد زهرائي بررسي تاثير افزودن پودر قلع به پودر فولاد 316L.ST در سينتر پذيري و ريز ساختار فيلترهاي فولادي مجله مواد و فناوريهاي پيشرفته، دوره ٨ ،شماره ٤ ،ص ٣١-٣٧- ١٣٩٨
2019 داريوش كوكبي، علي كفلو، مجيد پورانوري، رضا غلامي پور تحولات فازي حين لحيم كاري دماي بالا در اتصال غيرهمجنس سوپرآلياژ اينكونل ٧٣٨ به تركيب بين فلزي تيتانيوم آلومينايد با لايه واسط سه جزئي B-Si-N فرايندهاي نوين در مهندسي مواد
2019 M. Rajabi and F. Abrinaei High nonlinear optical response of Lanthanum-doped TiO2 nanorod arrays under pulsed laser irradiation at 532 nm Optics and Laser Technology, 109 (2019) 131-138
2018 19- H.R. Asgari Bidhendi, R. Gholamipour, Study on crystallization of rapid solidified ribbons of (Al90Ni8Zr2)98Mm2 alloy Study on crystallization of rapid solidified ribbons of (Al90Ni8Zr2)98Mm2 alloy
2018 F. Shahri, R, Gholamipour, B. Garmeh Effect of Al on the Structure and Magnetic Properties of Nanocrystalline FeSiBPCu Melt-Spun Ribbons Transactions of the Indian Institute of Metals, (2018) 71(1):35–39
2018 Meysam Zarchi, Shahrokh Ahangarani Study of silicon films deposited by EB-PVD and the effect of applying annealing conditions on them Optik International Journal for Light and Electron Optics, 154, 601–609
2018 Shahram Abbasi, Mohammad Esmailian, Shahrokh Ahangarani Investigation of the Microstructure, Micro-Texture and Mechanical Properties of a HSLA Steel, Hot-Rolled and Quenched at Different Cooling Rates Metallography, Microstructure, and Analysis, 7, 596–607
2018 Reza Rashidi, Mehdi Malekan, Reza Gholamipour Microstructure and mechanical properties of a Cu-Zr based bulk metallic glass containing atomic scale chemical heterogeneities Microstructure and mechanical properties of a Cu-Zr based bulk metallic glass containing atomic scale chemical heterogeneities , Materials Science & Engineering A, 729 (2018) 433–438
2018 Reza Rashidi, Mehdi Malekan, Reza Gholamipour, Crystallization kinetics of Cu47Zr47Al6 and (Cu47Zr47Al6)99Sn1 bulk metallic glasses Crystallization kinetics of Cu47Zr47Al6 and (Cu47Zr47Al6)99Sn1 bulk metallic glasses, Journal of Non-Crystalline Solids 498 (2018) 272–280
2018 الهام محقق پور، رضا غلامی پور، مرجان رجبی، شهاب شیبانی، مجید مجتهدزاده لاریجانی تاثیرعملیات حرارتی بر ساختار و دمای کوری آلیاژ فرومغناطیس نیکل تاثیرعملیات حرارتی بر ساختار و دمای کوری آلیاژ فرومغناطیس نیکل ، مهندسی متالورژی ، دوره 21، شماره 2 - شماره پیاپی 70، تابستان 1397، صفحه 88-94
2018 مهرداد فتاح زاده، علي كفلو، ولي االله دشتي زاد بررسي تاثير افزودن پرزدميم و نئودميم و مقايسه آن با ايتريم بر خصوصيات جذب گازهاي فعال در جاذب شيميايي تبخيرنشونده پايه زيركونيم-كبالت فصلنامه مواد و فناوريهاي پيشرفته، دوره ٧ ،شماره ٣ ،پائيز .٦٥-٥٥ صفحات، ١٣٩٧
2017 R. Gholamipour, A. Keyvanara, F. Shahri, Sh. Mirdamadi Effect of Joule-heating annealing on giant magnetoimpedance of Co64Fe4Ni2B19-xSi8Cr3Alx (x = 0, 1 and 2) melt-spun ribbons Ultrafine Grained & Nanostructured Materials (UFGNSM), Vol. 50, no. 2, 2017, pp. 111-116.
2017 Ekrami, F. Shahri, A. Mirak Effect of Rare-Earth Elements and Quenching Wheel Speed on the Structure, Mechanical and Thermal Properties of Rapidly Solidified AZ91 Mg Melt-Spun Ribbons Materials Science & Engineering A, Vol. 684, January 2017, PP. 586–591
2017 M. Fakouri Hasanabadi, M.A. Faghihi-Sani, A.H.Kokabi, and J.Malzbender The analysis of torsional shear strength test of sealants for solid oxide fuel cells Ceramics International, vol. 43, no. 15, pp. 12546–12550
2017 M. Fakouri Hasanabadi, A.H. Kokabi, A. Nemati, and S. Zinatlou Ajabshir Interactions near the triple-phase boundaries metal/glass/air in planar solid oxide fuel cells International Journal of Hydrogen Energy, vol. 42, no. 8, pp. 5306–5314
2017 Elham Mohagheghpour, Marjan Rajabi, Reza Gholamipour, Majid M Larijani, Shahab Sheibani Ion beam energy dependence of surface and structural properties of amorphous carbon films deposited by IBSD method on Ni-Cu alloy Journal of Materials Research
2017 Morteza Mahmoodan, Reza Gholamipour, Shamseddin Mirdamadi, Said Nategh Effect of Nb Content on Mechanical Behavior and Structural Properties of W/(Zr55Cu30Al10Ni5)100−x Nb x Composite Metallurgical and Materials Transactions A
2017 Shahrokh Ahangarani, Najme lari, Ali Shanaghi Influence of TEOS concentration and Triton additive on the nanostructure silica sol-gel anti-reflective coatings Int. J. Materials and Product Technology, 55(4), P 1-123
2017 MORTEZA MAHMOODAN, REZA GHOLAMIPOUR, SHAMSEDDIN MIRD AMADI,and SAID NATEGH Microstructure and interfacial shear strength in W/(Zr55Cu30Al10Ni5)100-xNbx composite "Microstructure and interfacial shear strength in W/(Zr55Cu30Al10Ni5)100-xNbx composites- Journal of Materials Engineering and Performance November 2017, Volume 26, Issue 11, pp 5571–5576
2017 Fahimeh Farahani, Reza Gholamipour Statistical weibull analysis of compressive fracture strength of (Zr55Cu30Al10Ni5)99Nb1 bulk metallic glass Statistical weibull analysis of compressive fracture strength of (Zr55Cu30Al10Ni5)99Nb1 bulk metallic glass, Journal of Alloys and Compounds, Volume 695, 25 February 2017, Pages 2740-2744
2017 S. Hosseinabadi and M. Rajabi Roughness kinetic and multiaffinity of anisotropic etched silicon Superlattices and Microstructures,102 (2017) 180-188
2017 E. Mohagheghpour, M. Rajabi, R. Gholamipour, M. M. Larijani, and S. Sheibani Ion beam energy dependence of surface and structural properties of amorphous carbon films deposited by IBSD method on Ni–Cu alloy Journal of Materials Research, 32 (2017) 1258-1266
2017 M. Rajabi & M. Ghorbani Performance evaluation of nanogenerators based on Ag doped ZnO nanorods Sensors and Actuators A: Physical, 266 (2017) 338-344
2016 E Mohagheghpour, M Rajabi, R Gholamipour, MM Larijani, S Sheibani Correlation study of structural, optical and electrical properties of amorphous carbon thin films prepared by ion beam sputtering deposition technique Applied Surface Science
2016 Fahimeh Farahani, Reza Gholamipour Giant size effect on compressive plasticity of (Zr55Cu30Al10Ni5) 99Nb1 bulk metallic glass Materials Science and Engineering: A
2016 Shahrokh Ahangarani, Najme lari, Ali Shanaghi Stable multilayer TiO2– SiO2 coatings for antireflection applications Glass Physics and Chemistry,42(1), P 70-77
2016 Najme lari, Shahrokh Ahangarani, Ali Shanaghi Six-layer antireflection TiO2/SiO2 coatings for solar covers: role of Triton and PDMS additives Journal of Materials Science: Materials in Electronics, 27(7) P 7141-7149
2016 Azadi, M, Rouhaghdam, A Sabour, Ahangarani S A Review on Titanium Nitride and Titanium Carbide Single and Multilayer Coatings Deposited by Plasma Assisted Chemical Vapor Deposition International Journal of Engineering, 29(5), 677-687
2016 Najme lari, Shahrokh Ahangarani, Ali Shanaghi A Novel Route to Prepare Hydrophobic and Durable Antireflective Hybrid Silica Coating by Sol-Gel Method Protection of Metals and Physical Chemistry of Surfaces,52(3), P 475-480
2016 N. Rahmani, R. S. Dariani, and M. Rajabi A proposed mechanism for investigating the effect of porous silicon buffer layer on TiO2 nanorods growth Applied surface Science 366 (2016) 359-364
2015 S. Dodangeh, F. Shahri, S.M. Abbasi The Effects of Carbon Content on the Microstructure and 650°C Tensile Properties of Incoloy 901 Superalloy High Temp. Mater. Proc. 2015, 34(8): 821–826
2015 M. Fakouri Hasanabadi, A. Nemati, and A.H. Kokabi Effect of intermediate nickel layer on seal strength and chemical compatibility of glass and ferritic stainless steel in oxidizing environment for solid oxide fuel cells International Journal of Hydrogen Energy, vol. 40, no. 46, pp. 16434–16442
2015 Ebrahim Karimi Saeidabadi, Reza Gholamipour, Behrouz Ghasemi Effect of melt infiltration parameters on microstructure and mechanical properties of tungsten wire reinforced (Cu50Zr43Al7) 99.5 Si0. 5 metallic glass matrix composite Transactions of Nonferrous Metals Society of China
2015 Milad Baygan, Reza Gholamipour, Farzad Shahri Gas induced semi-solid process effects on microstructure and mechanical properties of 319 aluminum alloy International Journal of Materials Research
2015 نجمه لاري، شاهرخ آهنگراني، علي شانقي مطالعه پوشش هاي ضدبازتاب تك لايه، چندلايه و كامپوزيتي سيليكا- تيتانيا تهيه شده به روش سل-ژل نشريه علمي پژوهشي سراميك، دوره ي4، شماره ي 1، بهار1394
2015 Najme lari, Shahrokh Ahangarani, Ali Shanaghi Preparation of nanostructure silica antireflective coatings by using sol–gel method Optik International Journal for Light and Electron Optics, Optik 126, 5363– 5367
2015 Najme lari, Shahrokh Ahangarani, Ali Shanaghi Effect of Different TiO2- SiO2 Multilayer Coatings Applied by Sol-Gel Method on Antireflective Property Journal of Materials Engineering and Performance
2015 J. Alipour, A. M. Shoushtari & A. Kaflou Ammonia borane confined by poly(methyl methacrylate)/multiwall carbon nanotube nanofiber composite, as a polymeric hydrogen storage material Journal of Materials Science volume 50, pages3110–3117(2015)
2015 M. Rajabi, S. Shogh, and A. Iraji zad Defect study of TiO2 nanorods grown by a hydrothermal method through photoluminescence spectroscopy Journal of Luminescence, 157 (2015) 235-242
2014 E Mohagheghpour, R Gholamipour, M Rajabi, M Mojtahedzadeh Larijani STUDY OF STRUCTURAL EVOLUTION OF AMORPHOUS CARBON FILMS ON Ni-Cu ALLOY AND ITS CORRELATION WITH DEPOSITION TEMPERATURE AND ION BEAM ENERGY Journal of Advanced Materials in Engineering (Esteghlal)
2014 V. Javaheri, F. Shahri, M. Mohammadnezhad, M. Tamizifar, M. Naseri The effect of Nb and Ti on structure and Mechanical prosperties of 12Ni-25Cr-0.4C austenitic heat-resistant steel after aging at 900 °C for 1000 h Journal of Materials Engineering and Performance, Volume 23, Issue 10, 2014, 3558–3566
2014 R Sabbaghizadeh, M Hashim, R Gholamipour, I Ismail, A Oskoueian EFFECTS OF Co ADDITIONS ON NANOSTRUCTURE AND MAGNETIC PROPERTIES OF MELT-SPUN (Nd, Pr) 2 (Fe, Ti, C) 14B/Fe3B ALLOYS Digest Journal of Nanomaterials and Biostructures
2014 نجمه لاري، شاهرخ آهنگراني، علي شانقي بررسی رفتار نوری پوشش های چندلایه-کامپوزیت تیتانیا-سیلیکا اعمال شده با روش سل- ژل فصلنامه علمي و پ‍وهشي فرايندهاي نوين در مهندسي مواد.
2014 Mahboobeh Azadi, Alireza Sabour, Shahrokh Ahangarani, Haman Hedaiat Mofidi Mechanical behavior of TiN/TiC multilayer coatings fabricated by plasma assisted chemical vapor deposition on AISI H13 hot work tool steel Surface & Coatings Technology, 245, 156–166
2014 M. Azadi, A. Sabour Rouhaghdam, S. Ahangarani Mechanical behavior of TiC coating by PACVD IJE TRANSACTIONS C: spects Vol. 27, No. 6, P 923-930
2014 M. Azadi, A. Sabour Rouhaghdam, S. Ahangarani, H. H. Mofidi Mechanical behavior and properties of TiN/TiC coating using PACVD Advanced Materials Research, vol 829, p 476-481
2014 Haman Hedaiatmofidi, Alireza Sabour Rouh Aghdam, Shahrokh Ahangarani, Mansour Bozorg, Mahboube Fracture toughness of TiN coating as a function of interlayer thickness Advanced Materials Research, vol 829, p 466-470
2014 M. Azadi, A. Sabour Rouhaghdam, S. Ahangarani Effect of Temperature and Gas Flux on the Mechanical Behavior of TiC Coating by Pulsed DC Plasma Enhanced Chemical Vapor Deposition International Journal of Engineering, 1243-1250
2014 Najme lari, Shahrokh Ahangarani, Ali Shanaghi Effect of catalyst type on structural, morphological, and optical properties of SiO2 thin film applied by sol- gel method Advanced Materials Research, vol 829, p 446-450
2014 Haman Hedaiatmofid, Alireza Sabour RouhAghdam, Shahrokh Ahangarani, Mansour Bozorg, Mahboube Azadi, Maryam Valiei Deposition of Titanium Layer on Steel Substrate Using PECVD Method: A Parametric Study A Parametric Study, Materials Sciences and Applications, 5, 140-148
2014 Author links open overlay panelA.Heidary MoghadamaV.DashtizadbA.KafloubH.YoozbashizadehaR.Ashiric Development of a nanostructured Zr3Co intermetallic getter powder with enhanced pumping characteristics Intermetallics Volume 57, February 2015, Pages 51-59
2013 N. Khademian, R. Gholamipour, F. Shahri, M. Tamizifar Effect of vanadium substitution for zirconium on the glass forming ability and mechanical properties of a Zr65Cu17.5Ni10Al7.5 bulk metallic glass Journal of Alloys and Compounds 546, 2013, 41–47.
2013 M. Abbasi, R. Gholamipour, F. Shahri Glass forming ability and mechanical properties of Nb-containing Cu-Zr-Al based balk metallic glasses Trans. Nonferrous Met. Soc. China 23(2013) 2037−2041
2013 M. Mahmodan, H.Akbarzadeh, F. Shahri Effect of Cr3C2 and VC on the mechanical and structural properties of sintered Wc-%10wt Co nanopowder World Journal of Nanoscience and Engineering, 2013, 3, 35-39
2013 Rahim Sabbaghizadeh, Mansor Hashim, Reza Gholamipour, Ghazaleh Bahmanrokh, Mohd Shamsul Ezzad Shafie Influence of Annealing Temperature on the Magnetic Properties of Rapidly Quenched (Nd, Pr) 2-(Fe, Co, Ga, Ti, C) 14B/-Fe Nanocomposite Ribbons Advances in Materials Science and Engineering
2013 Nima Khademian, Reza Gholamipour, Farzad Shahri, Morteza Tamizifar Effect of vanadium substitution for zirconium on the glass forming ability and mechanical properties of a Zr65Cu17. 5Ni10Al7. 5 bulk metallic glass Journal of alloys and compounds
2013 Nima Khademian, Reza Gholamipour Study on microstructure and fracture behavior of tungsten wire reinforced Cu-based and Zr-based bulk metallic glass matrix composites Journal of non-crystalline solids
2013 N Khademian, R Gholamipour Effects of infiltration parameters on mechanical and microstructural properties of tungsten wire reinforced Cu47Ti33Zr11Ni6Sn2Si1 metallic glass matrix composites Transactions of Nonferrous Metals Society of China
2013 Nima Khademian, Reza Gholamipour, Habib Inanloo Tailoring hardness and toughness in WC–13% Co–x TiC–y TiN (x= 5, 7.5–y= 5, 7.5) functional gradient hardmetals (FGHMs) International Journal of Refractory Metals and Hard Materials
2013 M Abbasi, R Gholamipour, F Shahri Glass forming ability and mechanical properties of Nb-containing Cu–Zr–Al based bulk metallic glasses Transactions of Nonferrous Metals Society of China
2013 S Sohrabi, H Arabi, A Beitollahi, R Gholamipour Planar Flow Casting of Fe 71 Si 13.5 B 9 Nb 3 Cu 1 Al 1.5 Ge 1 Ribbons Journal of materials engineering and performance
2013 Rahim Sabbaghizadeh, Mansor Hashim, R Gholamipour, Gh Bahmanrokh, S Kanagesan PHASE TRANSFORMATION, STRUCTURE AND MAGNETIC PROPERTIES OF Nd9. 4Pr0. 6FebalTixCxCo6Ga0. 5B6 RIBBONS PREPARED BY MELT-SPINNING METHOD Digest Journal of Nanomaterials & Biostructures (DJNB)
2013 M. Raoufi, Sh. Mirdamadi, F. Mahboubi, Sh. Ahangarani, M.S. Mahdipoor, H. Elmkhah Effect of active screen plasma nitriding pretreatment on wear behavior of TiN coating deposited by PACVD technique Applied Surface Science 258 (20), pp. 7820-7825
2013 Haman Hedaiatmofidi, Alireza Sabour Rouh Aghdam, Shahrokh Ahangarani The effect of chlorine content on properties of TiN deposited with PECVD method Materials Sciences and Applications
2013 M. Azadi, A. Sabour Rouhaghdam, S. Ahangarani Properties of TiC Coating by Pulsed DC PACVD Journal of Coatings, p 1-6
2012 A. Keyvanara, R. Gholamipour, S. Mirdamadi, F. Shahri, H.S. Amin Effect of nanocrystallization annealing on magnetic properties and magnetoimpedance of Co- based ribbons International Journal of Modern Physics, Vol.5, 2012, 841-846.
2012 Amir Keyvanara, Reza Gholamipour, Shamsedin Mirdamadi, Farzad Shahri, Hossein Sepehri Amin Effect of Nanocrystallization Annealing on Magnetic Properties and Magnetoimpedance of Co-Base Ribbons International Journal of Modern Physics: Conference Series
2012 M Malekan, SG Shabestari, W Zhang, SH Seyedein, R Gholamipour, K Yubuta, A Makino, A Inoue Formation of bulk metallic glass in situ nanocomposite in (Cu50Zr43Al7) 99Si1 alloy Materials Science and Engineering: A
2012 M. Raoufi, Sh. Mirdamadi, F. Mahboubi, Sh. Ahangarani, M.S. Mahdipoor, H. Elmkhah The influence of plasma nitriding pre-treatment on tribological properties of TiN coatings deposited by PACVD Journal of Materials Engineering and Performance 21 pp. 958-964
2012 Hasan Elmkhah, Farzad Mahboubi, Amir Abdollah-Zadeh, Shahrokh Ahangarani, Mahdi Raoufi, Mohammad Sadegh Mahdipoor Size dependency of corrosion behavior for TiN nanostructure coatings deposited by the PACVD method Materials Letters 82, pp. 105-108
2012 Ali Shanaghi, Ali Reza Sabour Rouhaghdam, Shahrokh Ahangarani Effect of duty cycle on residual stress and tribology behavior of TiC x nanostructure coating deposited by PACVD method Surface Engineering 28 (5), pp. 364-370
2011 M. Rahimnezhad-Soltani, K. Saberyan, F. Shahri, A. Simchi Formation mechanism of TiO2 nanoparticles in H2O-assisted atmospheric pressure CVS process powder Technology, 209, 2011, 15-24.
2011 M. Delavari, A. Salarvand, A. Rahi, F. Shahri The effect of powder metallurgy process parameters on mechanical properties of micro and nano-iron powder International Journal of Engineering, Science and Technology ,Vol. 3, No. 9, 2011, pp. 86-94
2011 M Mahmoodan, H Aliakbarzadeh, R Gholamipour Sintering of WC-10% Co nano powders containing TaC and VC grain growth inhibitors Transactions of Nonferrous Metals Society of China
2011 علي شانقي، شاهرخ آهنگراني، عليرضا صبور اعمال پوشش نانوساختار کاربيد تيتانيوم TiC به روش پلاسما CVD پالسي و مطالعه رفتار خوردگي آن در محيط 5/3 درصد NaCl مجله علمي و پژوهشي علوم و مهندسي خوردگي، شماره 1، 1390، صفحات 48-37
2011 M. Raoufi, Sh. Mirdamadi, F. Mahboubi, Sh. Ahangarani, M.S.Mahdipoor, H. Elmkhah Tribological study of TiN nano structured films deposited on plasma nitrided H11 steel by pulsed DC PACVD Advanced Materials Research 264-265 , pp. 1395-1400
2011 M.S. Mahdipoor, F. Mahboubi, Sh. Ahangarani, M. Raoufi, and H. Elmkhah the influence of plasma nitriding pre-treatment on the tribological properties of TiN coatings deposited by PACVD Journal of Materials Engineering and Performance
2011 M. Aliofkhazraei, Mohammad Yousefi, Sh. Ahangarani, A. Sabour Rouhaghdam Synthesis and properties of ceramic-based nanocomposite layer of aluminum carbide embedded with oriented carbon nanotubes Ceramics International, Volume 37, Issue 7, Pages 2151- 2157
2011 Ali Shanaghi, Shahrokh Ahangarani, Ali Reza Sabour Rouhaghdam, Paul K. Chu Improved tribological properties of TiC with porous nanostructured TiO2 intermediate layer Materials Chemistry and Physics 131 (1-2), pp. 420-424
2011 Mahdipoor M.S., Montazeri M., Soltanieh M., Mahboubi F., Ahangarani Sh., Habibi M.H Effect of duty cycle on microstructural, mechanical and tribological properties of TiN layer deposited by PACVD TMS Annual Meeting 1, pp. 107-116
2011 M. Raoufi, Sh. Mirdamadi, F. Mahboubi, Sh. Ahangarani, M.S. Mahdipoor, H. Elmkhah Correlation between the surface characteristics and the duty cycle for the PACVD derived TiN nanostructured films Surface and Coatings Technology, Volume 205, Issues 21-22, 25, Pages 4980-4984
2010 A. Kevanara, R. Gholamipour, Sh. Mirdamadi, F. Shahri, T. Salavatifard, A. Abdolhoseini Effect of quenching wheel speed on the structure, magnetic properties and magnetoimpedance effect in Co64Fe4Ni2B19-xSi8Cr3Alx (X=0, 1 and 2) melt spun ribbons Journal of Magnetism and Magnetic Materials, 322, 2010, 2680-2683
2010 N Khademian, R Gholamipour Fabrication and mechanical properties of a tungsten wire reinforced Cu–Zr–Al bulk metallic glass composite Materials Science and Engineering: A
2010 A Keyvanara, R Gholamipour, Sh Mirdamadi, F Shahri, T Salavati-Fard, A Abdolhoseini Effect of quenching wheel speed on the structure, magnetic properties and magnetoimpedance effect in Co64Fe4Ni2B19− xSi8Cr3Alx (x= 0, 1 and 2) melt-spun ribbons Journal of magnetism and magnetic materials
2010 M Esfahani, R Gholamipour, SH Mirdamadi, A Abdolhoseini, T Ohkubo Effects of Ti and C additions on the nanostructure and magnetic properties of (Nd, Pr)–(Fe, Co, Ga)–B melt-spun nanocomposite ribbons Physica B: Condensed Matter
2010 M Malekan, SG Shabestari, W Zhang, SH Seyedein, R Gholamipour, A Makino, A Inoue Effect of Si addition on glass-forming ability and mechanical properties of Cu–Zr–Al bulk metallic glass Materials Science and Engineering: A
2010 حمزه فراتی راد، احمدعلی آماده، شاهرخ آهنگرانی، هادی مرادی بررسي تاثير متغيرهاي فرايند نيتروژن دهي پلاسمايي پالسي بر مورفولوژي و سختي لايه هاي نيتريدي تشکيل شده بر روي فولاد گرم کار H11 مجله علمي و پژوهشي علوم و مهندسي سطح، شماره 9، 1389، صفحات 75-67
2010 Aliofkhazraei, Sh. Ahangarani, and A. Sabour Rouhaghdam Effect of the duty cycle of pulsed current on nanocomposite layers formed by pulsed electrodeposition RARE METALS, Vol. 29, No. 2
2010 M. Aliofkhazraei, Sh. Ahangarani, and A. Sabour Rouhaghdam Effect of surface nanocrystallization and PPEC time on complex nanocrystalline hard layer fabricated by plasma electrolysis Transactions of Nonferrous Metals Society of China, Volume 20, Issue 3
2009 M Mahmoodan, H Aliakbarzadeh, R Gholamipour Microstructural and mechanical characterization of high energy ball milled and sintered WC–10 wt% Co–xTaC nano powders International Journal of Refractory Metals and Hard Materials
2009 M Malekan, SG Shabestari, R Gholamipour, SH Seyedein Effect of Ge addition on mechanical properties and fracture behavior of Cu–Zr–Al bulk metallic glass Journal of Alloys and Compounds
2009 M Nezakat, R Gholamipour, A Amadeh, A Mohammadi, T Ohkubo Corrosion behavior of Nd {sub 9.4} Pr {sub 0.6} Fe {sub bal.} Co {sub 6} B {sub 6} Ga {sub 0.5} Ti {sub x} C {sub x}(x= 0, 1.5, 3, 6) nanocomposites annealed melt-spun ribbons Journal of Magnetism and Magnetic Materials
2009 Sh. Ahangarani, A.R. Sabour, F. Mahboubi, T. Shahrabi influence of active screen plasma nitriding parameters on corrosion behavior of a lowalloy steel Journal of Alloys and Compounds 484
2008 F. Shahri, A. Beitollahi Effect of Super-Heat Treatment and Quenching Wheel Speed on the Structure and Magnetic Properties of Fe-Si-B-Nb-Cu-Al-Ge Melt-Spun Ribbons Journal of Non-Crystalline Solids, Volume 354, Issue 14, 2008, 1487-1493
2008 H. Sepehri Amin, R. Gholamipour, F. Shahri , A. Abdolhoseini Effect of Al substitution for B on magnetic and structural properties of Co-based melt spun ribbons Journal of Magnetism and Magnetic Materials, 320, 2008, 2259-2261
2008 H Sepehri Amin, R Gholamipour, F Shahri, A Mohammadi Effect of Al substitution for B on magnetic and structural properties of Co-based melt-spun ribbons Journal of magnetism and magnetic materials
2008 M. Aliofkhazraei, Sh. Ahangarani, and A. Sabour Rouhaghdam Study of Pulse on Pulsed Nanocrystalline Plasma Electrolytic Carbonitriding on Nanostructure of Compound Layer Surface Review and Letters, Vol. 15
2007 F. Shahri, A. Beitollahi, S.G. Shabestari, M. Ghanaatshoar, M.M. Tehranchi, S.M. Mohseni, S.E. Roozmeh, N. Wanderka, F. Fiorillo Structural characterization and magnetoimpedance effect in amorphous and nanocrystalline AlGe-substituted FeSiBNbCu ribbons Journal of Magnetism and Magnetic Materials, 312, 2007, 35-42
2007 F. Shahri, A. Beitollahi, S.G. Shabestari, S. Kamali Effects of Heat-treatment on the Structure and Magnetic Properties of Al-Ge added FINEMET Alloys Physical Review B, 76, 2007, 024434
2007 R Gholamipour, A Beitollahi, VK Marghusian, T Ohkubo Cu effects on coercivity and microstructural features in nanocrystalline Nd–Fe–Co–B annealed melt-spun ribbons Physica B: Condensed Matter
2007 شاهرخ آهنگراني، فرزاد محبوبي، عليرضا صبور تاثير پارامترهاي مختلف نيتروژن دهي پلاسمايي به روش متداول و روش توري فعال بر روي رفتار فولاد کم آلياژ 30CrNiMo8 مجله علمي و پزوهشي امير کبير
2007 Sh. Ahangarani, A.R. Sabour, F. Mahboubi Influence of the active screen setup and process parameters on the behavior of plasma nitrided 30CrNiMo8 steel Applied Surface Science 254, P 1427–1435
2006 R Gholamipour, A Beitollahi, VK Marghusian, T Ohkubo, K Hono, SV Andreev, AN Bogatkin, SS Duragin, AN Kozolov, NV Kudervatykh Microstructure–magnetic properties relationships in nanocrystalline Nd–Fe–Co–Ge–B annealed ribbons physica status solidi (a)
2006 R Gholamipour, A Beitollahi, VK Marghusian, T Ohkubo, K Hono Microstructural studies and micromagnetic analysis of nanocrystalline NdFeCoMB (M= Ga, Ge) melt-spun ribbon Metallurgical and Materials Transactions A
2006 A Beitollahi, R Gholamipour, VK Marghusian, SV Andreev, AN Bogatkin, SS Duragin, AN Kozlov, NV Kudrevatykh, SG Bogdanov, AN Pirogov Magnetic and structural properties of rapidly quenched Nd-Fe-Co-Ge-B alloys The Physics of Metals and Metallography
2006 Sh. Ahangarani, F. Mahboubi, A.R. Sabour Effects of various nitriding parameters on active screen plasma nitriding behavior of a low-alloy steel Vacuum 80 (2006) 1032–1037
2004 S.G. Shabestari, F. Shahri Influence of modification, solidification condition and heat treatment on the microstructure and mechanical properties of A356 aluminum allo Journal of Materials Science, 39, 2004, 2023-2032
 

©  تمامی حقوق متعلق به سازمان پژوهش‌های علمی و صنعتی ایران می باشد.