مقاله در مجلات

Journal title, volume, issue, pages.
2023 Optimization of fracture behavior of alumina/silicon carbide nano ceramic
2023 An Investigation of 3D Printed Parts Specifications and Applications in Catalytic Substrates and Fuel Cells
2023 Amin Jabbari, Karen Abrinia A metal additive manufacturing method: semi-solid metal extrusion and deposition
2023 A Daliri, MJ Maghrebi, MR Soltani Measurement of flow fluctuations induced by a dielectric-barrier-discharge plasma actuator using hot-film sensors Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 237, 7, 1708-1713, DOI: 10.1177/09544100221127462
2022 Mohammadmehdi Namazi*, Amir Fassih, Amir Mobini Geometric parameters effect on the reaction zone of premixed CH4 catalytic combustion in a fibrous porous medium Journal of Particle Science and Technology, 8 (1), 1-7, DOI: 10.22104/JPST.2022.5702.1210
2022 Majid Aghasharifian Esfahani, Mohammadmehdi Namazi, Theoklis Nikolaidis and Soheil Jafari Advanced Control Algorithm for FADEC Systems in the Next Generation of Turbofan Engines to Minimize Emission Levels Mathematics, Vol. 10, 1780
2022 Mohammadmehdi Namazia, Mohammadreza Nayebi, Amin Isazadeh, Ali Modarresi, Iman Ghasemi Marzbali, Seyed Mostafa Hosseinalipour Experimental and numerical study of catalytic combustion and pore-scale numerical study of mass diffusion in high porosity fibrous porous media Energy Journal, Vol. 238, part B
2020 Sayed Mostafa Hosseinalipour, Mohammadmehdi Namazi Study of Geometrical Characteristics Effects on Radiation Properties in High Porosity Fibrous Porous Media Using the Pore-Scale Simulation and Two-Flux Model Thermal Science Journal, Vol. 24, 2B, pp. 1299-1310
2020 Saeed Hosseinpour, Seyed Alireza Haji Seyed Mirza Hosseini, Ramin Mehdipour, Amir Hooman Hemmasi, Hassan Ali Ozgoli Energy Modelling and Techno-Economic Analysis of a Biomass Gasification-CHAT-ST Power Cycle for Sustainable Approaches in Modern Electricity Grids Journal of Renewable Energy and Environment
2020 Mohsen Shahabi, Hassan Ali Ozgoli, Abbas Akbarnia Modeling and Investigation of Gas Turbines Heat Recovery in the Semnan Oil Pumping Station for Heating Gas-Oil to Reduce Energy Consumption of Pumping Journal of Energy Management and Technology
2020 Sadegh Safari, Amir Hossein Ghasedi, Hassan Ali Ozgoli Integration of Solar dryer with a hybrid system of Gasifier- Solid Oxide Fuel Cell/Micro Gas Turbine: Energy, Economy and Environmental Analysis Environmental Progress & Sustainable Energy
2020 Meisam Moghadasi, Hassan Ali Ozgoli, Foad Farhani Machine learning-based operational control framework for reducing energy consumption of an amine-based gas sweetening process International Journal of Energy Research
2020 Meisam Moghadasi, Hassan Ali Ozgoli, Foad Farhani Steam consumption prediction of a gas sweetening process with methyldiethanolamine solvent using machine learning approaches International Journal of Energy Research
2020 S. Abanades, H. Abbaspour, A. Ahmadi, B. Das, M. A. Ehyaei, F. Esmaeilion, M. El Haj Assad, T. Hajilounezhad, D. H. Jamali, A. Hmida, H. A. Ozgoli, S. Safari, M. AlShabi & E. H. Bani-Hani A Critical Review of Biogas Production and Usage with Legislations Framework across the Globe International Journal of Environmental Science and Technology
2020 Mohsen SHahabi, Ozgoli H.A., Abbas AKbarnia Modeling and Investigation of Gas Turbines Heat Recovery in the Semnan Oil Pumping Station for Heating Gas-Oil to Reduce Energy Consumption of pumping Journal of Energy Management and Technology (JEMT) Vol. 4, Issue 4, 21-27. 2020.
2020 S. Safari, H. Ali. Ozgoli Electrochemical Modeling and Techno‐Economic Analysis of Solid Oxide Fuel Cell for Residential Applications Journal of Renewable Energy and Environment, 7, 40‐50
2019 Preparing a solid filament for use in additive manufacturing of metals
2019 Sayed Mostafa Hosseinalipour, Mohammadmehdi Namazi Pore-Scale Numerical Study of Flow and Conduction Heat Transfer in Fibrous Porous Media Journal of Mechanical Science and Technology, Vol. 33, pp. 2307–2317
2019 S. M. Arabi, H. Ghadamian, M. Aminy, H. A. Ozgoli, B. Ahmadi, M. Khodsiani The energy analysis of GE‐F5 gas turbines inlet air–cooling systems by the off‐design method Measurement and Control, 52, 1489‐1498
2019 Abbas Akbarnia, Rashvand M Design, fabrication and evaluation of horizontal rotary separator of olive oil (Three-Phase Decanter), Agric Eng Int (CIGR Journal), July 2019, Vol.21, No. 2, 180-187 , .
2019 Abbas Akbarnia, Rashvand M An evaluation of physical, dynamic and aerodynamic properties of olive, مجله علمی Research in Agricultural Engineering (RAE Journal), 65, 2019 (2): 48-55, .
2019 Abbas akbarnia, Rashvand M " Effect of temperature, water content and velocity on the quality of virgin olive oil extracted through three-phase centrifuge AIMS Agriculture and Food ، .2019; 4(1): 165–176
2019 Abbas akbarnia, Rashvand M " The feasibility of using image processing and artificial neural network for detecting the adulteration of sesame oil AIMS Agriculture and Food ، .2019; 4(2): 237–243
2019 Ashkan Shokrian, Mobli H, Akbarnia A, Jafari A, Mousazade H, Zhu B A study on the Three-Phase Separator Machine (Tricanter) for Olive Oil Extraction " Journal of Theoretical and Applied Mechanics
2019 " Fusion of dielectric technique and intelligence methods in order to predict acidity and peroxide of virgin olive oil International Journal of Postharvest Technology and Innovation ، .2019; Accepted 4(2): 237–243
2019 Abbas akbarnia, Rashvand M " Fabrication and Evaluation of Continuous Press Machine for Extracting Sesame Oil using artificial intelligence techniques International Commission of Agricultural and Biosystems Engineering (CIGR Journal) ، .2019;ACcepted 4(2): 237–243
2018 Additive manufacturing apparatus using a semi-solid extrusion of wire
2018 Developing thixo-extrusion process for additive manufacturing of metals in semi-solid state
2018 Sayed Mostafa Hosseinalipour, Mohammadmehdi Namazi, Ali Modarresi, Iman ghasemi marzbali Numerical study and experimental measurement of permeability coefficient in fibrous porous media, considering geometric details for investigating the effect of geometric parameters ISME ISC journal, Volume 20, Issue 2, Pages 170-189.
2018 Abbas Akbarnia, Rashvand M Fabrication and evaluation of Rotary Separator of Sesame Oil, مجله علمیInternational Journal of Food Science and Biotechnology, 2018; 3(3): 77-82.
2018 Ashkan Shokrian, Mobli H, Akbarnia A, Jafari A, Mousazade H, Zhu B Application an Euler–Euler Multiphase-Flow Model for Simulation Flow in a Centrifugal Separator Machine, American Journal of Fluid Dynamics, 2018, 8 (4): 112-115..
2018 Abbas akbarnia, Rashvand M Design and Optimization of Press Machine in Order to Produce Sesame Oil" American Journal of Mechanics and Applications 2018 ; 6(4):
2018 طراحی و ساخت یک گازی ساز زیست توده مقیاس کوچک از نوع پایین سو (Down Draft) بمنظور تولید انرژی از پسماندهای جامد
2018 S. A. Emami and M. H. Emami Design and Implementation of an Online Precise Monitoring and Performance Analysis System for Centrifugal Pumps IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS Issue Date: FEBRUARY 2018 Volume: 65, Issue:2 On Page(s): 1636-1644 Print ISSN: 0278-0046 Online ISSN: 1557-9948 Digital Object Identifier: 10.1109/TIE.2017.2723875
2017 High temperature flow behaviour of semi-solid steel alloys
2017 A.Mobini, S.Behzadipour, M.Saadat Hand Acceleration Measurement by Kinect for Rehabilitation Applications Iranica. Transaction B, Mechanical Engineering; Tehran 24.1(2017): 191-201
2017 عباس اکبرنیا طراحي و ساخت يك مدل آزمايشگاهي موزع با ترتيب ريزش نردباني (عرضي) قلمه براي استفاده در كارنده نيشكر در نشريه علمي پژوهشي ماشين هاي كشاورزي دانشگاه فردوسي مشهد. جلد 7، نيمسال اول 1396، ص 321-312.
2017 2. Hossein Ghadamian, Hassan Ali Ozgoli, Foad Farhani, and Mojtaba Baghban Yousefkhani Proposing New Algorithm for Modeling of Regenerative Fuel Cell (RFC) System ", (Accepted), JREE, 2017
2017 1. Siamak Azimi-Nam and Foad Farhani ffect of Temperature on Electrical Parameters of Phosphorous Spin–on Diffusion of Polysilicon Solar Cells (Accepted), JREE, 2017.
2016 3. Hassan Ali Ozgoli, Meisam Moghadasi, Foad Farhani, Maziar Sadigh Modeling and simulation of an Integrated Gasification SOFC-CHAT Cycle to Improve Power and Efficiency Environmental Progress, Published online in Wiley Online Library (wileyonlinelibrary.com), DOI 10.1002/ep.12487, (2016)
2015 A.Mobini, S.Behzadipour, M.Saadat Test–retest reliability of Kinect’s measurements for the evaluation of upper body recovery of stroke patients Biomedical engineering online 14.1 (2015): 75
2015 K.Bashti, M.N.Tahmasebi, H.Kaseb, F.Farahmand, M.Akbar, A.Mobini Biomechanical Comparison Between Bashti Bone Plug Technique and Biodegradable Screw for Fixation of Grafts in Ligament surgery THE ARCHIVES OF BONE AND JOINT SURGERY, Article 7, Volume 3, Issue 1, January 2015, Page 29-34.
2015 7. Ardekani, M.A., Farhani, F., Mazidi, M ., Effects of Cross Wind Conditions on Efficiency of Heller Dry Cooling Tower, Experimental Heat Transfer (EHT), 28(4), 07/2015.
2015 4. Ardekani, M.A., M.A. Ranjbar, Farhani, F., Use of Guide Vanes for Improvement of Flow Pattern and Enhancement of Thermal Performance of Dry Cooling Towers Mechanics and Industry, Accepted on 21/10/2015.
2015 محمد علي اردكاني، محسن مزيدي، فواد فرحاني بررسي هاي ميداني و تحليلي اثر عوامل محيطي بر عملكرد برجهاي خنك كن خشك هلر از ديدگاه اقتصادي مجله مهندسي مكانيك ايران - انجمن مهندسي مكانيك ايران، 1394
2015 2. محمد علي اردكاني، فواد فرحاني، محسن مزيدي بررسي تجربي استفاده از ديوارهاي يادشكن براي افزايش دبي ورودي برج هلر تحت وزش باد مجله مهندسي مكانيك ايران - انجمن مهندسي مكانيك ايران
2014 S.M. Hosseinalipour, M.M. Namazi, A. Behravan, Kh. Ghadiri, M. Madaelahi Preparation and performance testing of the radiative catalytic pad for flameless combustion of natural gas in different climate conditions Modarres Mechanical Engineering (ISC), Volume 14, Issue 9, Pages 57-64
2014 A.Mobini, S.Behzadipour, M.S.Foumani Accuracy of Kinect’s skeleton tracking for upper body rehabilitation applications Disability and Rehabilitation: Assistive Technology 9.4 (2014): 344-352
2014 S. M. Arabi, H. Ghadamian, M. Aminy, H. A. Ozgoli, B. Ahmadi, M. Khodsiani Energy performance analysis of GE‐F5 gas turbines at off‐design conditions by applying an innovative convergent– divergent system for the inlet air cooling Measurement and Control, 52, 1508‐1516
2014 S. Hosseinpour, A. Haji Seyed Mirzahosseini, R. Mehdipour, A. H. Hemmasi, H. A. Ozgoli Energy Modelling and Techno‐Economic Analysis of a Biomass Gasification‐CHAT‐ST Power Cycle for Sustainable Approaches in Modern Electricity Grids Journal of Renewable Energy and Environment, 7, 43‐51
2014 Abbas Akbarnia, Mohammadi A., Farhani F., Alimardani R Simulation of draft force of winged share tillage tool using artificial neural network model مجله علمی Agric Eng Int: CIGR Journal, Vol 16, No 4, 57-65. Dec. 2014.
2014 29. Farhani, F., Venkatarathnam, G. and Sarangi, S.K., Effect of Finite Number of Plates on the Transient Response of Perforated Plates, during a Single-Blow Transient Test of Matrix Heat Exchanger Surfaces”, Procd. 18th International Cryogenic Conference (ICEC18), Mumbai, India. Published in Ind. J. Cryogenics (2001).
2014 Abbas Akbarnia, Farhani F Study of fuel consumption in Three tillage methods. 2014 Research in Agricultural Engeneering ، Vol. 60, 2014, No 4: 142-147 ، RAE (2014) .
2014 14. Abbas Akbarnia, Foad Farhani, Study of Fuel Consumption in Three Tillage Methods ”, Research in Agricultural Engineering (In Press) (2013).
2014 13. Alireza Ashori, Shabnam Sheshmani, Foad Farhani Preparation and characterization of bagasse/HDPE composites using multi-walled carbon nanotubes”, Carbohydrate Polymers 92 (2013) 865– 871.
2014 9. Abbas Akbarnia, Foad Farhani, Study of Fuel Consumption in Three Tillage Methods”, Research in Agricultural Engineering (RAE), 60(4), pp. 142 –147, (2014).
2014 8. A. Akbarnia, A. Mohammadi, F. Farhani, R. Alimardani Simulation of draft force of winged share tillage tool using artificial neural network model" Agric Eng Int: CIGR Journal, 16(4), 57-61, (2014).
2014 6. Ardekani, M.A., Farhani, F., Mazidi, M., M.A. Ranjbar Study of Degradation of Dry cooling Tower Performance under Wind Conditions and Method for Tower Efficiency Enhancement International Journal of Engineering (IJE), 28(3), 460-466, (March 2015).
2014 5. Foad Farhani and Azar Anvari, Effects of Some Parameters on the Thermal Control of a Small LEO Satellite Journal of Space Science and Technology (JSST), 7(1) (2014
2014 International Conference on Mechanical and Aerospace Engineering, University of Tehran, Tehran-Iran, April, 2016 بررسي تجربي تاثير تغيير فاصله و خميدگي پره هاي راهنما بر كيفيت جريان خروجي نشريه علمي-پژوهشي مهندسي هوانوردي، سال شانزدهم، شماره دوم، پاييز و زمستان 93.
2014 كريمي، د. ، ملكيان، م. م. اندازه گيري ميدان كرنش و نرخ كرنش در حين ماشينكاري بر پايه روش هم ربطي تصاوير مجله مهندسی مکانیک مدرس، شماره 13
2013 M.Fakhar, S.Behzadipour, A.Mobini Motion performance measurement using the Microsoft Kinect sensor International Journal of Reliable and Quality E-Healthcare (IJRQEH) 2 (4), 28-37
2013 A.Mobini, S.Behzadipour, M.Saadat Robotics and tele-rehabilitation: recent advancements, future trends International Journal of Reliable and Quality E-Healthcare (IJRQEH) 2 (4), 1-13.
2013 Abbas Akbarnia, Farhani F., Heidary B عنوانEconomic comparison of tillage and planting operations in three tillage systems, 2013, Agric Eng Int: CIGR Journal, Vol 15, No 4, 180-184
2013 عباس اکبرنیا بررسي سوخت مصرف شده و میزان عملکرد محصول جو در سه روش خاک ورزی مجله پژوهش هاي توليدات گياهي، جلد 20، شماره 1، ص 203-210، دانشگاه علوم کشاورزی و منابع طبیعی گرگان.
2013 12. Mohammad Hasan Shojaeefard, Reza Abdi Behnagh, Mostafa Akbari, Mohammad Kazem Besharati Givi, Foad Farhani “Modelling and Pareto optimization of mechanical properties of friction stir welded AA7075/AA5083 butt joints using neural network and particle swarm algorithm Materials and Design, 44 (2013) 190–198.
2013 11. Mostafa Akbari, Mohammad Hasan Shojaeefard, Mojtaba Tahani, Foad Farhani Sensitivity Analysis of the Artificial Neural Network Outputs in Friction Stir Lap Joining of Aluminum to Brass ", Advances in Materials Science and Engineering, (2013).
2013 10. Abbas Akbarnia, Foad Farhani, Bahareh Heidary Economic comparison of tillage and planting operations in three tillage systems" Agricultural Engineering International: CIGR Journal, Dec. (2013
2013 M. M. Malekian, L. A. Isayevich Rolling Strips Varying Thickness with Elimination of Widening dvanced Material Research, Vol: 622-623, pp:466-471.
2012 Asghar Mohammadi, Alimardani R., Akbarnia A., Akram A Modeling of draft force variation in a winged share tillage tool using fuzzy table look-up scheme, 2012, Agric Eng Int: CIGR Journal, Vol 14, No 4, 262-268.
2012 16. Mohammad Ali Ardekani, Vahid Reza Nafisi, Foad Farhani “ Extrapolation of Calibration Curve of Hot-wire Spirometer using a Novel Neural Network Based Approach , JMSS/July 2012, Vol. 2(4).
2012 15. Farhani F., Niaki K.S., Vahdat S.E., Firozi A Study of Effects of Deep Cryotreatment on Mechanical Properties of 1.2542 Tool Steel, Materials and Design, 42 (2012(, pp 279-288.
2011 Investigation on the impact behavior of Al 2 O 3-SiC-MgO nanoceramic/metal laminated composite
2011 نسیبه ایزدی¬خواه، مبلی ح، اکبرنیا ع، احمدی ح، رفیعی ش اثرات سرعت دورانی خردکن چکشی، دما و زمان هم زدن بر کمیت و کیفیت روغن زیتون رقم روغنی، 1390 مجله تحقیقات مهندسی کشاورزی، جلد 12، شماره 1، ص 82-71، وزارت جهاد کشاورزی، سازمان تحقیقات، آموزش و ترویج کشاورزی.
2011 19. Nourbakhsh, A., Farhani, F. and Ashori, A Nano-SiO2 filled rice husk/polypropylene composites: Physio-mechanical properties” Industrial Crops and Products, 33 (2011), pp. 183-187.
2011 18. Shabnam Sheshmani, Alireza Ashori, Foad Farhani Effect of Extractives on the Performance Properties of Wood Flour-Polypropylene Composites Journal of Applied Polymer Science, Vol. 000, 000–000 (2011), © 2011 Wiley Periodicals, Inc. DOI 10.1002/app.34745, Published online in Wiley Online Library (wileyonlinelibrary.com)
2011 17. F. Farhani, and K.S. Niaki, A Programmable System for Treatment of Alloy Steels at Cryogenic Temperatures”
2010 عباس اکبرنیا، برقعی ع. م.، بهارلوئیان ش مقایسه ی انرژی (سوخت) مصرف شده و میزان عملکرد محصول در دو سامانه خاک ورزی1389 ششمین کنگره ملی مهندسی ماشین¬های کشاورزی و مکانیزاسیون، 24 و 25 شهریور 1389، پردیس کشاورزی و منابع طبیعی دانشگاه تهران- کرج
2010 Abbas Akbarnia, Alimardani R., Baharloeyan Sh Performance Comparison of Three tillage systems in Wheat Farms Australian journal of Crop Science ، AJCS 4(8):586-589 (2010).
2010 20. Ardekani, M. A., and Farhani, F Practical Considerations for Validity of Constant Temperature Anemometer Flow Measurements in Industrial Applications Flow Measurement and Instrumentation (2010).
2009 عباس اکبرنیا، مبلی ح.، اکرم ا.، حامدی ح.، رفیعی ش تاثیرات دما و درصد افزایش آب به خمیر زیتون بر خصوصیات كيفي و كمي روغن زیتون، ، مجله علوم کشاورزی و منابع طبیعی، دانشگاه علوم کشاورزی و منابع طبیعی گرگان، شماره هشتم، ص 180-174.
2009 عباس اکبرنیا، مبلی ح.، اکرم ا.، حامدی ح.، رفیعی ش بررسی برخی عوامل موثر بر استحصال كيفي و كمي روغن در حرارت و زمان¬های مختلف به همزدن خمیر حاصل از دانه ی رقم روغنی زيتون 1388، مجله مهندسي بيوسيستم ايران (مجله علوم كشاورزي)، پرديس كشاورزي و منابع طبيعي دانشگاه تهران، دوره 40 شماره 1، ص 14-9.
2009 عباس اکبرنیا، مبلی ح.، اکرم ا.، حامدی ح.، رفیعی ش تعيين و مقايسه مقاومت فشاري چهار رقم زيتون رايج در ايران 1387، مجله علوم كشاورزي، پرديس كشاورزي و منابع طبيعي دانشگاه تهران، دوره 39 شماره 2، ص 237-243.
2009 23. Emami, H. and Farhani, F Frequency Response Analysis of a Small Satellite Structure under Random Vibration Acceleration Loads Using Mode Superposition Method J. Materials Science Research India, Volume 6(1), (2009).
2009 22. A. Anvari, A., Farhani, F. and Niaki, K.S “Comparative Study on Space Qualified Paints Used for Thermal Control of a Small Satellite ”. Selected paper of The Fifth International Chemical Engineering Congress (IChEC2008), (Jan. 2008), Kish-Iran. Published in the Iranian Journal of Chemical Engineers (IJChE), 2009
2009 21. Ardekani, M. A. and Farhani, F Experimental Study on Response of Hot Wire and Cylindrical Hot Film Anemometers Operating under Varying Fluid Temperatures Flow Measurement and Instrumentation 20 (2009) 174-179.
2008 24. Emami, H., Farhani, F. and Safarabadi, M "Influence of modal effective mass distribution on the static and dynamic behavior of a satellite structure under base excitations J. Materials Science Research India, Volume 5(2), (2008).
2008 عباس اکبرنیا، مبلی ح.، اکرم ا.، حامدی ح.، رفیعی ش عنوان اثر سرعت دوراني واحد خرد-له كن و دماي واحد همزن بر كيفيت و كميت روغن زيتون استحصالي از رقم روغني ، مجله مهندسي بيوسيستم ايران (مجله علوم كشاورزي)، پرديس كشاورزي و منابع طبيعي دانشگاه تهران ، دوره 39 شماره 1، ص 83-75
2008 عباس اکبرنیا طراحي بهينه و توسعه دستگاه درو- ردیف ساز جلوتراکتوری و درو- بافه بند BCS نشریه علمي پژوهشی دانش کشاورزی- دانشكده كشاورزي دانشگاه تبريز، شماره 4 جلد 18، ص 223-233
2008 Л.А. Исаевич, М.И. Сидоренко, Д.М. Иваницкий, М.М. Малекиан Получение полос переменной толщины с регулируемым уширением Вестник БНТУ. – № 4. – С. 35–43
2008 Л.А. Исаевич, М.И. Сидоренко, Д.М. Иваницкий, М.М. Малекиан Определение значений критического угла и опережения при продольной прокатке полос переменной толщины Весцi Нац. акад. нав. Беларусi..–№ 4.– С.32–38.
2008 Л.А. Исаевич, М.И. Сидоренко, Д.М. Иваницкий, М.М. Малекиан Определение параметров процесса продольной прокатки для получения полос переменной толщины с нарастающим обжатием Вестник БНТУ. – № 3. – С. 18–26
2008 Л.А. Исаевич, М.И. Сидоренко, Д.М. Иваницкий, М.М. Малекиан Определение критического угла продольной прокатки полос переменной толщины с нарастающим обжатием Металлургия: Респ. межвед. сб. науч. тр. – 2008. – № 31. – С. 190–198
2008 HAMID EMAMI, FOAD FARHANI1 and MAJID SAFARABADI Influence of modal effective mass distribution on the static and dynamic behavior of a satellite structure under base excitations Material Science Research India Vol. 5(2), 209-218
2007 26. Niaki, K.S., Anvari, A. and Farhani, F Aluminum and Composite Materials for Satellite Structures- A Comparison of Thermal Performance”, J. Materials Science Research India, Volume 4(1), (2007).
2007 25. Niaki, K.S., Farhani, F. and Anvari, A Design and Construction of a Test Bed for Evaluation of Energy Efficiency of Residential Exhaust Fans J. Current World Environment, Volume 2(1), (2007).
2007 فراس حكاك و فواد فرحاني مقاومت گرمايي تماسي مجله علمی-ترویجی انجمن مهندسي مكانيك ايران، سال شانزدهم، شماره 55- آبان 1386.
2007 آذر انوري، مهران شهرياري، فواد فرحاني و كيوان سيدي نياكي مدلسازي‏، تحليل حرارتي و استخراج زواياي بهينه براي پانلهاي خورشيدي بازشونده در يك ماهواره مدار پايين زمين مدلسازي‏، تحليل حرارتي و استخراج زواياي بهينه براي پانلهاي خورشيدي بازشونده در يك ماهواره مدار پايين زمين
2007 Л.А. Исаевич, М.М. Малекиан Анализ и сравнение различных устройств и способов прокатки полос переменной по длине толщины Вестник БНТУ. – № 5. – С. 11–15.
2005 28. Hemmati, B., Farhani, F. and Boland, P Parametric Design of a Jig & Fixture Using CAE and Study of Positioners and Clamping with FEM” J. Materials Science Research India, Volume 3(2), (2005).
2005 27. Farhani, F., Hemmati, B. and Boland, P “Design and Modeling of a Modular Bore Gauge and Life Cycle Studies” J. Materials Science Research India, Volume 3(2), (2005).
2002 ساخت و ارزيابي ماشين خردكن سرشاخه هاي حاصل از هرس درختان ، مجله علمي پژوهش و سازندگي وزارت جهاد كشاورزي، شماره 55، 1381.
1997 30. Farhani, F., Sarangi, S.K. and Dutta, A A Hot Wall Vacuum Furnace For Brazing of Matrix Heat Exchangers ", Ind. Bulletin of Vacuum, (1997).
1993 31. Venkatarathnam, G., Farhani, F. and Sarangi, S.K Performance Evaluation of Stack of Perforated Plates Used in Matrix Heat Exchangers ”, Ind. J. Cryogenics, Vol. 18 (1-4), pp. 204-210, (1993).
 

©  تمامی حقوق متعلق به سازمان پژوهش‌های علمی و صنعتی ایران می باشد.