Pseudomonas aeruginosa
PTCC No:
1707
Other collection No. ::
ATCC 15442, DSM 939, CIP 103467, NCIMB 10421, CCUG 2080
Category:
Quality control strains
Reference strains
Medium:
Culture condition:
37°C, Aerobic
Information:
<- ATCC <- A Beloian <-L. Herman. Isolated from animal room water bottle. Broad spectrum of resistance to various commercial germicide. Pyocyanin not produced. Quality control strain for biosynth products. Used for assay of antimicrobial preservatives, testing antimicrobial handwashing formulations, bacterial resistance testing textiles, testing disinfectants and testing antimicrobial agents. Used for testing slimicide, efficacy testing and food testing. Applicable in opportunistic pathogen research. Recommended as a test microorganism for EPA Method MB-06-10: Germicidal Spray Products as Disinfectants (GSPT): Testing of Staphylococcus aureus, Pseudomonas aeruginosa, and Salmonella enterica. Recommended as a test microorganism for EPA Method MB-09-08: Disinfectant Towelette Test: Testing of Staphylococcus aureus, Pseudomonas aeruginosa, and Salmonella enterica. Recommended as a test microorganism for EPA Method MB-19-06: Preparing a Pseudomonas aeruginosa or Staphylococcus aureus Biofilm using the CDC Biofilm Reactor. Recommended as a test microorganism for EPA Method MB-25-05: OECD Quantitative Method for Evaluating Bactericidal and Mycobactericidal Activity of Microbicides Used on Hard, Non-Porous Surfaces. Recommended as a test microorganism for EPA Method MB-41-00: Method for the Evaluation of Antimicrobial Activity of Hard, Nonporous Copper-Containing Surface Products. Recommended as a test microorganism for AENOR UNE-EN 1276: Evaluation of chemical disinfectant or antiseptic for bactericidal activity. Recommended as a test microorganism for ASTM E2562: Standard Test Method for Quantification of Pseudomonas aeruginosa Biofilm Grown with High Shear and Continuous Flow using CDC Biofilm Reactor
Literature:
Efficacy testing (Standard Quantitative Carrier Test Method to Evaluate the Bactericidal, Fungicidal, Mycobactericidal, and Sporicidal Potencies of Liquid Chemical Microbicides. West Conshohocken, PA:ASTM International, ASTM Standard Test Method E 2111-05; Standard Test Method for Determining the Acivity of Incorporated Antimicrobial Agent(s) In Polymeric or Hydrophobic Materials . West Conshohocken, PA:ASTM International, ASTM Standard Test Method E 2180-01; Standard Quantitative Disk Carrier Test Method for Determining the Bactericidal, Virucidal, Fungicidal, Mycobactericidal and Sporicidal Activities of Liquid Chemical Germicides. West Conshohocken, PA:ASTM International, ASTM Standard Test Method E 2197-02; Carpet Sanitizers. Washington, DC: Environmental Protection Agency, EPA EPA DIS/TSS-8, 1981). Testing antimicrobial agent (Standard Practice for Evaluation of Pre-saturated or Impregnated Towelettes for Hard Surface Disinfection . West Conshohocken, PA:ASTM International, ASTM Standard Test Method E 2362-04). Testing antimicrobial handwashing formulations (US Patent 5,719,113 dated Feb 17 1998). Testing disinfectants (AOAC International Testing disinfectants against Pseudomonas aeruginosa, phenol coefficient method. Gaithersburg, MD:AOAC International, AOAC "Official Methods of Analysis of the AOAC International" 955.13; AOAC International Testing disinfectants against Pseudomonas aeruginosa, hard surface carrier test method. Gaithersburg, MD:AOAC International, AOAC "Official Methods of Analysis of the AOAC International" 991.49; US General Services Administration Disinfectant-detergent, general purpose (phenolic type). Washington, DC:US General Services Administration, Commercial Item Description A-A-1439A, 1998; US General Services Administration Disinfectant-detergent, general purpose (iodophor). Washington, DC:US General Services Administration, Commercial Item Description A-A-1440, 1981; US General Services Administration Disinfectant, general purpose (quaternary ammonium compound). Washington, DC:US General Services Administration, Commercial Item Description A-A-1441B, 2005; AOAC International Germicidal spray products as disinfectants. Gaithersburg, MD:AOAC International, AOAC "Official Methods of Analysis of the AOAC International" 961.02; Testing Disinfectants against Pseudomonas aeruginosa, Use-Dilution Method. Gaithersburg, MD:AOAC International, AOAC "Official Methods of Analysis of the AOAC International" 964.02; Disinfectants for Use on Hard Surfaces. Washington, DC:Environmental Protection Agency, EPA EPA DIS/TSS-1, 1982; Confimatory Efficacy Data Requirements. Washington, DC:Environmental Protection Agency, EPA EPA DIS/TSS-5, 1982; Air Sanitizers. Washington, DC:Environmental Protection Agency, EPA EPA DIS/TSS-11, 1980; Laundry Additives--Disinfection and Saitization. Washington, DC:Environmental Protection Agency, EPA EPA DIS/TSS-13, 1980; Standard Test Method for Evaluation of Laundry Sanitizers and Disinfectants. West Conshohocken, PA:ASTM International, ASTM Standard Test Method E 2274-03; Standard Test Method for Evaluation of Laundry Sanitizers and Disinfectants for Use in High Efficiency Washing Operations . West Conshohocken, PA:ASTM International, ASTM Standard Test Method E 2406-04). Testing slimicide (Standard Test Method for Efficacy of Slimicides for the Paper Industry-Bacterial and Fungal Slime. West Conshohocken, PA:ASTM International, ASTM Standard Test Method E 1839-07;Standard Test Method for Evaluation of Laundry Sanitizers and Disinfectants. West Conshohocken, PA:ASTM International, ASTM Standard Test Method E 2274-03). Testing bactericides (Chemical disinfectants and antiseptics --- Quantitative suspension test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used in food, industrial, domestic and institutional areas --- Test method and requirements (phase 2, step 1). London, UK:British Standards Institution, British Standard BS EN 1276:1997, 1997; Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of basic bactericidal activity of chemical disinfectants and antiseptics - Test method and requirements (Phase 1). London, UK:British Standards Institution, British Standard BS EN 1040:2005, 2005; Chemical disinfectants and antiseptics. Quantitative suspension test for the evaluation of bactericidal activity of chemical disinfectants for instruments used in the medical area. Test method and requirements (Phase 2/Step 1) . London, UK:British Standards Institution, British Standard BS EN 13727:2003; Chemical disinfectants and antiseptics - Preservation of test organisms used for the determination of bactericidal, sporicidal and fungicidal activity. London, UK:British Standards Institution, British Standard BS EN 12353:2006; Chemical disinfectants and antiseptics --- Quantitative non-porous surface test for the evaluation of bactericidal and/or fungicidal activity of chemical disinfectants used in food, industrial, domestic and institutional areas --- Test method and requirements without mechanical action (phase 2/step 2). London, UK:British Standards Institution, British Standard BS EN 13697:2001; Chemical disinfectants and antiseptics --- Quantitative carrier test for the evaluation of bactericidal activity for instruments used in the medical area --- Test method and requirements (phase 2, step 2). London, UK:British Standards Institution, British Standard BS EN 14561:2006; Chemical disinfectants and antiseptics --- Quantitative surface test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used in veterinary area on non-porous surfaces without mechanical action --- Test method and requirements (phase 2, step 2). London, UK:British Standards Institution, British Standard Draft BS EN 14349, 2006; Chemical disinfectants and antiseptics --- Application of European Standards for chemical disinfectants and antiseptics. London, UK:British Standards Institution, British Standard BS EN 14885:2006
Supplied as:
Freezed-dried
Risk group:
2